【Process Description】

By flocculation adding unit to the circulating cooling water pump dosing flocculants, the raw water pressurized by booster pump，coagulant pump impeller stirred by the original uniform mixing of small solid particles in water suspension for micro-flocculation，rapid generation Greater than 5 microns in size flocs，Flows through the filter system piping circulating water treatment system into full effect，and then filtered by the filter retained within the filter, and finally flow back to the circulating water pipe passing。
This equipment combined with air and water washing，anti-air by the fan to provide washing, backwash water from the backwash pump。

【Technology characteristics】

【Effective removal of suspended solids, biological slime and other small particles significantly improve water quality and reduce turbidity】

Because the circulating water system continuously exposed to air and other impurities, for some time，the cooling water system will accumulate a lot of silt and other sediments。 If not removed， these impurities will reduce the heat exchange efficiency and promote growth of bacteria and the occurrence of corrosion and reduce equipment life， increase energy, and even perforation。
The system adopts the international advanced water treatment technology environment protection and energy cycle, with high removal rate of suspended solids，filtering accuracy，filtering speed, low backwash water consumption, small footprint, superior performance and energy saving environmental protection, can effectively remove Impurities of different sizes and damaged the living environment of bacteria and algae，and the system attached to the suspension filtered to remove algae， bacteria, algae is not easy to breed bacteria to survive, to ensure that the cooling water system is always clean。

Technical Data: Filter precision: ≥ 5 μm SS removal rate of 95% or more
                  Filtration rate: 30m/h-65m/h
Satisfied that the sewage capacity: 15kg/m3-40kg/m3

【Automatic Dosing, corrosion and scale inhibitors, biocide】

The system uses a controlled release of Germany's unique technology –“Water must be clean” system， according to water quality control in the water released by a certain percentage. Is a cost-effective equipment and piping to prevent scale and corrosion of the new generation of water treatment chemicals.
Has the following characteristics：

1、In the ultra-high temperature above 1200 ℃ under the conditions of polymerization, colorless, tasteless and non-toxic, no harmful effects on the human body。
2、Prevention of calcium, magnesium and silica, such as the formation of scale, reduce water hardness。
3、In steel and copper and other metal to form protective film to prevent corrosion. Antiseptic effect: small amounts of water will be clean in pp composition, dissolved oxygen cut off the chemical reaction with the metal ions to prevent the continued reaction of ferrous hydroxide, ferric hydroxide, that is, passive role in the formation of a pipe wall Amorphous can automatically repair of the protective film (1um), this layer has a strong affinity for molecular membrane resistance when the dissolved oxygen corrosion, thus inhibiting the corrosion process。
4、Convenient and reliable, does not consume power, cost-effective。